First we baked the cakes. My sister has the soccer ball pan, which is a half sphere so she baked the top and bottom pieces. Then as she packed them to bring to my house the day before we decorated, she realized they didn't make a full circle when you put them together. I baked a nine-inch circle for the middle the next morning before she arrived.

While my cake finished cooling, we cut out the fondant flowers for the decorations, and she formed the handle and spout around some wire. It would have been better if we'd made the handle and spout a few days earlier out of gum paste, but I was insanely busy that week, so I didn't get it done like I'd planned. Remember if you make colored decorations out of gum paste or fondant with the plan to dry them that you need to put in quite a bit more color than you expect because they fade as they dry. We used the daisy cut outs for these flowers, and just put a ball of yellow fondant in the centers.

Then we filled the layers and frosted the ball. Before we started the crumb coating, I trimmed a bit off of one of the circles so it would sit flat on the plate and not roll too easily. We also trimmed the sides to they would seams between the layers would be smoother.
We added a 9" round of carboard between the second and third layers and put dowls inside the cake to support it so the top layers wouldn't be too heavy and squish the bottom one. As always, you have to try to make the frosting as smooth as you can before adding the fondant because it shows ripples under the surface, but don't kill yourself over it, since tiny differences in height will smooth out as you play with the fondant.

We rolled the fondant just a bit thinner on the edges, then carefuly lifted the layer of fondant and worked it in the middle to stretch it. This might take a little practice to get it to work right without leaving thin spots where your knuckles pressed against the fondant. Make sure it looks as good as possible before putting it on the cake--once you get the buttercream on the fondant it becomes a mess to start over.

We pressed an indentation into the cake at the level where the lid should go. In retrospect, we should have carved a lid into the cake before we frosted it--something to remember for the future. Then we used buttercream to decorate the teapot. We used tip 804 for the dots with the large pastry coupler and just put the dots on randomly. We used them to cover up some of the minor irregularities in the cake, an added advantage.

We touched our impecably clean fingertips to powdered sugar and pressed it onto the dots to flatten them out.

Then we used a clean paint brush (like the type you buy for kids to water color with. I have a set that is used ONLY for cake decorating) to spread a bit of water on the back of the flowers so they would stick to the cake. Fondant sticks to fondant really well with just a touch of dampness. The bigger flowers didn't stick to the bottom half of the cake very well because of gravity, but the smaller ones did all right.

Here's the finished product with the handle and spout installed. We used multiple pieces of wire to stick them into the cake, but they were still quite heavy, so in the future I'd use a thinner spout--and again, I'd do it ahead and let it dry so I wouldn't have to worry about the wire cutting throught the fondant or gum paste as I put it together.
We just used a basic dot to finish off the bottom. If I had it to do again, I would use a lot more flowers and various kinds along the base to hide the places where the fondant didn't smooth together perfectly at the base. It's hard enough getting a smooth finish on a round cake without ading the fact that a spherical one actually gets smaller at the bottom. Still, We were pretty happy with the end result.



To learn more abou these products and many others, check out our 
















If your child wasn't really thrilled with Cars, but still loves race cars, we also have a NASCAR-style 
For train lovers, we have this
Or this fun
If you have a little farmer boy (or girl), maybe this 






She used the large cutout from the set and for the first row of petals cut out every-other petal.
This picture is really bad, but you can see she ran the toothpick through the cut peice, then wrapped it around the tip. Once she had the shape she wanted on the top petals, she pinched off the base part so the second set of petals would be even or nearly even with the inner row.
This is the second row of petals. She cut out one petal from the shape and added cut lines between the petals so they could overlap each other. when she slid it onto the toothpick, she also used a clean paintbrush from a kids' watercolor set that she bought just for fondant. She brushed a thin layer of water over the petals where they would overlap. Fondant will stick to itself easily with a touch of water. Be careful, though, not to let water drip on any parts that are going to be seen on the outside as water will leave marks behind to mar the surface.
For the third row she didn't cut any petals out, but still split the space between the petals. Then she took a toothpick and separated the petals and curved them back slightly to give them a slightly more realistic look. This really works best if you use thin pieces of fondant. These were rolled to 1/8 inch or thinner, but there may be some times when slightly thicker pieces will work fine.
If you're going to have roses, you obviously need leaves! Again, there were no cutters for leaves in stock, so she used the edge of a glass to cut each edge. If she had to do it again, she would have used a round cookie cutter because the glass didn't leave a crisp edge and they had to be trimmed with a knife to clean them up.
Next she used a toothpick to draw lines on the leaves.
Then she set everything out to dry since she made them several days in advance of the cake. Be aware that some colors fade a lot when the fondant dries. The pink faded to way less than half the original brilliancy as it dried, while the leaves only lightened a little bit.
A few days later she baked the cake, frosted it (crumb layer, then an outter layer), and rolled the purple fondant. Once that was ready, she used the toothpicks on the roses to stick the roses in the cake where she wanted them. If needed, they could have been cut off or trimmed back, but they were handy to creat the design she wanted.
The first of the small flowers were attached to the bottom of the cake with buttercream icing.
Then she used some yellow buttercream to put yellow dots in the flowers and the roses.